|
6712 Full-Size
Portable Sampler
Wide
range of bottle configurations, plug-in flow and parameter monitoring -
and Isco reliability
 The
6712 Portable Sampler features a vacuum-formed ABS plastic shell to
withstand exposure and abuse. Its tapered design and trim 20-inch (50.8
cm) diameter result in easy manhole installation and removal. Large,
comfortable handles make transporting safe and convenient - even when
wearing gloves. The NEMA 4X, 6 (IP67) enclosure is submersible,
watertight, and dust-tight. Plug-in 700 Series Modules and the new
SDI-12 interface make it easy to add flow and parameter monitoring to
your 6712-based system.
Isco's advanced 6712 Controller allows you to select different
programming modes to assure the most suitable routine for your
application. Programming is fast and simple, with on-line help just a
key stroke away.
In Standard Programming Mode, the controller walks you through the
sampling sequence step-by-step, allowing you to choose all parameters
specific to your application. Extended Programming Mode lets you enter
more complex programs including “smart sampling” event notification,
triggered on any combination of up to 16 inputs.
Standard Features
- New SDI-12 interface provides “plug and play” connection with
multi-parameter water-quality sondes and other compatible devices.
- Standard 512kB memory gives you great flexibility for logging
environmental data.
- Choice of 11 different glass and plastic bottle configurations
ranging from 24 x 1liter to 1 x 5.5 gallon.
- NEMA 4X, 6 (IP67) controller enclosure
- Rugged ABS plastic shell
- Foam-insulated base holds up to 30 pounds (13.5 kg) of ice to
preserve samples even in extreme conditions.
- Sample delivery at the EPA-recommended velocity of 2 ft/sec.,
even at head heights of 26 feet.
- Pump revolution counter and patented liquid detection sensor
ensure accurate sample volumes - and tells you when tubing should be
replaced.
Applications
- wastewater effluent
- stormwater monitoring
- CSO monitoring
- permit compliance
- pretreatment compliance
Options and Accessories
- Composite sampling bottle configurations
- Sequential sampling bottle configurations
- ProPak disposable sample bags
- Suction lines and strainers
- Power sources including Ni-cad or lead-acid batteries and solar
panels
- 674 Rain Gauge
- 700 Series Modules for flow and parameter measurement
- Multi-parameter sonde (pH, conductivity, temperature, DO)
- Telephone Modem
- Cell phone-based data retrieval, dial-out alarm, and remote
control
- Wireless radio data retrieval with 2102 module
- 581 RTD data retrieval device
- Flowlink® Software
Specifications
|
6712 Full-Size Portable Sampler |
| Size (Diam
x Ht): |
20 x
27.0 inches (68.6 x 50.7 cm) |
|
Weight: |
Dry,
Less Battery - 32 lbs (15 kg) |
|
Material: |
Fiberglass-reinforced plastic with UV-resistant gel coat
|
| Power
Requirements: |
12 VDC
|
|
Pump |
| Intake
purge: |
Adjustable air purge before and after each sample. |
| Tubing
life indicator: |
Provides a warning to change pump tubing. |
| Intake
suction tubing: |
Vinyl
or Teflon®; 3/8 inch (1 cm) ID; 3 to 99 feet (1 to 30 m) Length
|
| Pump
tubing life: |
Typically 1,000,000 pump counts |
|
Maximum lift: |
28
feet (8.5 m) |
|
Repeatability: |
Typical ±5 ml or ±5% of the average volume in a set |
|
Typical line velocity @ Head height: |
3.0
ft./s @ 3 ft; 2.9 ft./s @ 10 ft; 2.7 ft./s @ 15 ft. (0.91 m/s @
0.9 m; 0.87 m/s @ 3.1 m; 0.83 m/s @ 4.6 m) |
| Liquid
presence detector: |
Non-wetted, non-conductive sensor detects when liquid sample
reaches the pump to automatically compensate for changes in head
heights. |
|
Controller |
|
Weight: |
13
lbs. (5.9 kg) |
| Size (HxWxD):
|
10.3 x
12.5 x 10 inches (26 x 31.7 x 25.4 cm) |
|
Operational temperature: |
32° to
120°F (0° to 49°C) |
|
Enclosure rating: |
NEMA
4X, 6 IP67 |
|
Program memory: |
Non-volatile ROM |
| Flow
meter signal input: |
5 to
15 volt DC pulse or 25 millisecond isolated contact closure.
|
| Number
of composite samples: |
Programmable from 1 to 999 samples. |
| Clock
Accuracy: |
1
minute per month, typical, for real time clock |
|
Software |
| Sample
frequency: |
1
minute to 99 hours 59 minutes, in 1 minute increments.
Non-uniform times in minutes or clock times 1 to 9,999 flow
pulses |
|
Sampling modes: |
Uniform time, non-uniform time, flow, event. (Flow mode is
controlled by external flow meter pulses.) |
|
Programmable sample volumes: |
10 to
9,990 ml in 1 ml increments |
| Sample
retries: |
If no
sample is detected, up to 3 attempts; user selectable
|
| Rinse
cycles: |
Automatic rinsing of suction line up to 3 rinses for each sample
collection |
|
Program storage: |
5
sampling programs |
|
Sampling Stop/Resume: |
Up to
24 real time/date sample stop/resume commands |
|
Controller diagnostics: |
Tests
for RAM, ROM, pump display, and distributor |
|
|
6712C Compact
Portable Sampler
Advanced
sampling capabilities in a smaller package
 The
6712C compact model gives you the world's most versatile sampler
controller in a smaller-diameter package that fits in 18" and offset
manholes. Large, comfortable handles make transporting safe and
convenient - even when wearing gloves. The NEMA 4X, 6 (IP67) enclosure
is submersible, watertight, and dust-tight. Plug-in 700 Series Modules
and the new SDI-12 interface make it easy to add flow and parameter
monitoring to your 6712-based system.
Isco's advanced 6712 Controller allows you to select different
programming modes to assure the most suitable routine for your
application. Programming is fast and simple, with on-line help just a
key stroke away.
In Standard Programming Mode, the controller walks you through the
sampling sequence step-by-step, allowing you to choose all parameters
specific to your application. Extended Programming Mode lets you enter
more complex programs including “smart sampling” event notification,
triggered on any combination of up to 16 inputs.
Standard Features
- New SDI-12 interface provides “plug and play” connection with
multi-parameter water quality sondes and other compatible monitoring
devices.
- Standard 4MB of memory gives you great flexibility for logging
environmental data.
- Choice of 5 different bottle configurations ranging from 24 x
500 ml to 1 x 2.5 gallon.
- NEMA 4X, 6 (IP67) controller enclosure
- Rugged ABS plastic shell
- Foam-insulated base holds up to 15 pounds (6.8 kg) of ice.
- Sample delivery at the EPA-recommended velocity of 2 ft/sec.,
even at head heights of 26 feet.
- Patented pump revolution counter ensures accurate sample volumes
- and tells you when tubing should be replaced.
Applications
- wastewater effluent
- stormwater monitoring
- CSO monitoring
- permit compliance
- pretreatment compliance
Options and Accessories
- Sequential sampling 24- and 12-bottle configurations
- ProPak disposable sample bags
- Composite sampling 2.5 gallon (glass or plastic) bottle
configurations
- Suction lines and strainers
- Power sources including Ni-cad or lead-acid batteries and solar
panels
- 674 Rain Gauge
- 700 Series Modules for flow and parameter measurement
- Telephone Modem
- Cell phone-based data retrieval and dial-out alarm
- Wireless radio data retrieval with 2102 module
- 581 RTD data retrieval device
- Flowlink® Software
- Optional temperature sensor - provides precise log of sample
compartment temperature for automatic documentation
Specifications
|
6712C Compact Portable Sampler |
| Size (Diam
x Ht): |
17.7 x
27.6 inches (45.7 x 70.1 cm) |
|
Weight: |
Dry,
Less Battery - 31 lbs (14 kg) |
|
Material: |
Fiberglass-reinforced plastic with UV-resistant gel coat
|
| Power
Requirements: |
12 VDC
|
|
Pump |
| Intake
purge: |
Adjustable air purge before and after each sample. |
| Tubing
life indicator: |
Provides a warning to change pump tubing. |
| Intake
suction tubing: |
Vinyl
or Teflon®; 3/8 inch (1 cm) ID; 3 to 99 feet (1 to 30 m) Length
|
| Pump
tubing life: |
Typically 1,000,000 pump counts |
|
Maximum lift: |
28
feet (8.5 m) |
|
Repeatability: |
Typical ±5 ml or ±5% of the average volume in a set |
|
Typical line velocity @ Head height: |
3.0
ft./s @ 3 ft; 2.9 ft./s @ 10 ft; 2.7 ft./s @ 15 ft. (0.91 m/s @
0.9 m; 0.87 m/s @ 3.1 m; 0.83 m/s @ 4.6 m) |
| Liquid
presence detector: |
Non-wetted, non-conductive sensor detects when liquid sample
reaches the pump to automatically compensate for changes in head
heights. |
|
Controller |
|
Weight: |
13
lbs. (5.9 kg) |
| Size (HxWxD):
|
10.3 x
12.5 x 10 inches (26 x 31.7 x 25.4 cm) |
|
Operational temperature: |
32° to
120°F (0° to 49°C) |
|
Enclosure rating: |
NEMA
4X, 6 IP67 |
|
Program memory: |
Non-volatile ROM |
| Flow
meter signal input: |
5 to
15 volt DC pulse or 25 millisecond isolated contact closure.
|
| Number
of composite samples: |
Programmable from 1 to 999 samples. |
| Clock
Accuracy: |
1
minute per month, typical, for real time clock |
|
Software |
| Sample
frequency: |
1
minute to 99 hours 59 minutes, in 1 minute increments.
Non-uniform times in minutes or clock times 1 to 9,999 flow
pulses |
|
Sampling modes: |
Uniform time, non-uniform time, flow, event. (Flow mode is
controlled by external flow meter pulses.) |
|
Programmable sample volumes: |
10 to
9,990 ml in 1 ml increments |
| Sample
retries: |
If no
sample is detected, up to 3 attempts; user selectable
|
| Rinse
cycles: |
Automatic rinsing of suction line up to 3 rinses for each sample
collection |
|
Program storage: |
5
sampling programs |
|
Sampling Stop/Resume: |
Up to
24 real time/date sample stop/resume commands |
|
Controller diagnostics: |
Tests
for RAM, ROM, pump display, and distributor |
|
|
3700 Full-Size
Portable Sampler
Full-size
performance and flexibility
 The
full-featured 3700 Sampler collects sequential or composite samples
based on time, flow rate, or storm conditions. It's a great choice if
you don't need the sophisticated parameter monitoring and logging
capabilities of our 6700 Series.
The exclusive LD90 gives you automatic compensation for changes in head
height, plus automatic suction line rinsing to prevent cross
contamination. The non-contacting liquid sensor is not affected by
conductivity, viscosity, temperature, or liquid composition. There are
no internal tubing connections, so cleaning and tubing replacement are
fast and easy. The 3700 pump outperforms most competing samplers and
maintains the EPA-recommended 2 ft/second line velocity at head heights
up to 16 feet, with 1/4-inch suction line. For higher lifts, we
recommend our 6700 Series.
Ample ice capacity and high-performance insulation in the base keep your
samples cool. With 20 lbs of ice in the base and 4 gallons liquid
collected at 65°F, the sample temperature is maintained at least 32°F
below ambient for 24 hours.
Standard Features
- Exclusive LD90 Liquid Presence Detector and pump revolution
counting system ensure accurate, repeatable sample volumes.
- Basic and extended programming modes for:
- Uniform time intervals
- Non-uniform time intervals
- Stormwater runoff sampling
- Multiple bottle compositing
- Split sampling
- Thick, foamed-in-place insulation and twin-wall design provide
maximum performance in sample preservation.
- 3700 Controller is housed in a NEMA 4X and 6 (IP67)
environmentally sealed enclosure, and is fully interchangeable
between portable and refrigerated samplers.
Applications
- wastewater effluent
- stormwater monitoring
- CSO monitoring
- permit compliance
- pretreatment compliance
Options and Accessories
- Sequential sampling bottle configurations - 24 x 1 liter
polypropylene or 350 ml glass; 12 x 1 liter polyethylene or glass; 4
x 1 gallon polyethylene or glass.
- Composite sampling bottle configurations (with optional
composite base) - 1 x 2.5 gal polyethylene or glass; 1 x 4 gallon
polyethylene
- ProPak disposable sample bags
- Suction lines and strainers
- Samplink® Software for retrieval of sampling logs
Specifications
|
3700 Full-size Portable Sampler |
| Size
(Diam x Ht): |
19 x
25 inches (50.5 x 64 cm) |
|
Weight: |
Dry,
less battery - 37 lbs (16.8 kg) |
|
Material: |
Fiberglass-reinforced plastic with UV-resistant gel coat
|
| Power
required: |
12 VDC
|
|
Pump |
| Intake
purge: |
Adjustable air purge before and after each sample. |
| Tubing
life indicator: |
Provides a warning to change pump tubing. |
| Pump
tubing life: |
Recommended 500,000 pump counts |
| Intake
suction tubing: |
Vinyl
or Teflon®; 3/8 inch (1 cm) or 1/4 inch (0.6cm) ID; 3 to 99 feet
(1 to 30 m) Length |
|
Maximum lift: |
26 ft.
(7.9 m) |
|
Repeatability: |
±10 ml
typical |
|
Typical line velocity @ Head height: |
2.9
ft./s @ 3 ft; 2.5 ft./s @ 10 ft; 1.9 ft./s @ 15 ft. (0.88 m/s @
0.9 m; 0.76 m/s @ 3.1 m; 0.58 m/s @ 4.6 m) |
| Liquid
presence detector: |
Non-wetted, non-conductive sensor detects when liquid sample
reaches the pump to automatically compensate for changes in head
heights. |
|
Controller |
|
Weight: |
11 lbs
(5 kg) |
| Size
(HxWxD): |
10 x
12.5 x 10 inches (25 x 32 x 25 cm) |
|
Operational temperature: |
32° to
120°F (0° to 49°C) |
|
Enclosure rating: |
NEMA
4X, 6 IP67 |
|
Program memory: |
Non-volatile ROM |
| Flow
meter signal input: |
5 to
15 volt DC pulse or 25 millisecond isolated contact closure.
|
|
Interface port: |
8 pin
connector; data output at 2400 baud in ASCII. RS-232 format with
handshake. |
| Clock
accuracy: |
1
minute per month, typical, for real time clock |
|
Software |
| Sample
frequency: |
1
minute to 99 hours 59 minutes, in 1 minute increments.
Non-uniform times in minutes or clock times 1 to 9,999 flow
pulses |
| Sample
pacing: |
Uniform time, non-uniform time, flow, flow paced/time switched,
STORM (time and flow paced sampling during sample collection.)
Flow pacing is controlled by external flow pulses. |
|
Multiplexing: |
Samples per bottle (1 to 50 with 1000 ml bottles; 1 to 17 with
350 ml bottles), bottles per sample (1 to 24), multiple bottle
compositing. |
| Sample
volumes: |
Programmable from 10 to 9,990 ml in 1 ml increments |
| Sample
retries: |
If no
sample is detected, up to 3 attempts; user selectable
|
| Rinse
cycles: |
Automatic rinsing of suction line up to 3 rinses for each sample
collection |
|
Program storage: |
3
sampling programs |
|
Programming modes: |
Basic,
extended and STORM |
|
Sampling stop/resume: |
Up to
24 real time/date sample stop/resume commands. |
|
Controller diagnostics: |
Tests
for RAM, ROM, pump display, and distributor |
|
|
3700C Compact
Portable Sampler
Fits
where a full-size sampler won't
 Smaller
and lighter than our full size 3700 portable, the 3700C uses the same
controller. The 3700C will easily pass through an 18-inch diameter or
offset manhole.
Bottle choices with the 3700C are more limited than with the full-size
model. The five bottle options include 350 ml glass or polyethlyene; 500
ml polyethylene; or 2.5 gallon glass or poly. The 3700C's bottle
cartridge makes bottle changes fast and easy.
The exclusive LD90 gives you automatic compensation for changes in head
height, plus automatic suction line rinsing to prevent cross
contamination. The non-contacting liquid sensor is not affected by
conductivity, viscosity, temperature, or liquid composition. There are
no internal tubing connections, so cleaning and tubing replacement are
fast and easy. The 3700 pump outperforms most competing samplers and
maintains the EPA-recommended 2 ft/second line velocity at head heights
up to 16 feet, with 1/4-inch suction line. For higher lifts, we
recommend our 6700 Series.
Standard Features
- Quick-change bottle cartridge system
- Exclusive LD90 Liquid Presence Detector and pump revolution
counting system ensure accurate, repeatable sample volumes.
- Basic and extended programming modes for:
- Uniform time intervals
- Non-uniform time intervals
- Stormwater runoff sampling
- Multiple bottle compositing
- Split sampling
- Thick foam insulation (R-11) and 16-lb. ice capacity to preserve
samples.
- 3700 Controller is housed in a NEMA 4X and 6 (IP67)
environmentally sealed enclosure, and is fully interchangeable
between portable and refrigerated samplers.
Applications
- wastewater effluent
- stormwater monitoring
- CSO monitoring
- permit compliance
- pretreatment compliance
Options and Accessories
- Sequential sampling bottle configurations - 24 wedge-shaped 500
ml polyethylene; 12 round 500 ml polyethylene; 12 round 375 ml glass
- Composite sampling bottle configurations (with optional
composite base) - 1 x 2.5 gal (9450 ml) polyethylene or glass
- Suction lines and strainers
- Samplink® Software for retrieval of sampling logs
Specifications
|
3700C Compact Portable Sampler |
| Size
(Diam x Ht): |
17 x
27 inches (45 x 70.5 cm) |
|
Weight: |
Dry,
less battery - 25 lbs (11.3 kg) |
|
Material: |
Fiberglass-reinforced plastic with UV-resistant gel coat
|
| Power
required: |
12 VDC
|
|
Pump |
| Intake
purge: |
Adjustable air purge before and after each sample. |
| Tubing
life indicator: |
Provides a warning to change pump tubing. |
| Pump
tubing life: |
Recommended 500,000 pump counts |
| Intake
suction tubing: |
Vinyl
or Teflon®; 3/8 inch (1 cm) or 1/4 inch (0.6cm) ID; 3 to 99 feet
(1 to 30 m) Length |
|
Maximum lift: |
26 ft.
(7.9 m) |
|
Repeatability: |
±10 ml
typical |
|
Typical line velocity @ Head height: |
2.9
ft./s @ 3 ft; 2.5 ft./s @ 10 ft; 1.9 ft./s @ 15 ft. (0.88 m/s @
0.9 m; 0.76 m/s @ 3.1 m; 0.58 m/s @ 4.6 m) |
| Liquid
presence detector: |
Non-wetted, non-conductive sensor detects when liquid sample
reaches the pump to automatically compensate for changes in head
heights. |
|
Controller |
|
Weight: |
11 lbs
(5 kg) |
| Size (HxWxD):
|
10 x
12.5 x 10 inches (25 x 32 x 25 cm) |
|
Operational temperature: |
32° to
120°F (0° to 49°C) |
|
Enclosure rating: |
NEMA
4X, 6 IP67 |
|
Program memory: |
Non-volatile ROM |
| Flow
meter signal input: |
5 to
15 volt DC pulse or 25 millisecond isolated contact closure.
|
|
Interface port: |
8 pin
connector; data output at 2400 baud in ASCII. RS-232 format with
handshake. |
| Clock
accuracy: |
1
minute per month, typical, for real time clock |
|
Software |
| Sample
frequency: |
1
minute to 99 hours 59 minutes, in 1 minute increments.
Non-uniform times in minutes or clock times 1 to 9,999 flow
pulses |
| Sample
pacing: |
Uniform time, non-uniform time, flow, flow paced/time switched,
STORM (time and flow paced sampling during sample collection.)
Flow pacing is controlled by external flow pulses. |
|
Multiplexing: |
Samples per bottle (1 to 50 with 1000 ml bottles; 1 to 17 with
350 ml bottles), bottles per sample (1 to 24), multiple bottle
compositing. |
| Sample
volumes: |
Programmable from 10 to 9,990 ml in 1 ml increments |
| Sample
retries: |
If no
sample is detected, up to 3 attempts; user selectable
|
| Rinse
cycles: |
Automatic rinsing of suction line up to 3 rinses for each sample
collection |
|
Program storage: |
3
sampling programs |
|
Programming modes: |
Basic,
extended and STORM |
|
Sampling stop/resume: |
Up to
24 real time/date sample stop/resume commands. |
|
Controller diagnostics: |
Tests
for RAM, ROM, pump display, and distributor |
|
|
|